14
Model SK-FFT Manual — P/N 54711:B2 12/18/2020
Installation
Installing the Fire Fighter’s Hand Set
Cabinet Door and Dead Front Removal
While installing the cabinet it may be necessary to remove the cabinet door and the dead front panel. This section provides
instructions on how to remove the door and dead front panel.
1. Using a Phillips head screw driver, remove the six screws that hold the dead front panel in place. See Figure 3.4.
.
Figure 3.4 Cabinet Door and Dead Front Panel Removal
2. Using a 1/4” Hex drive, remove the six Hex nuts that hold the cabinet door in place. See Figure 3.4.
Re-Attaching the Cabinet Door
To re-attach the cabinet door reverse the procedure in section .
3.2 Installing the Fire Fighter’s Hand Set
FFT Local Handset installation involves the following steps:
1. Insert phone cord through hole of dead front panel. See Figure 3.5.
Figure 3.5 Handset Cord Inserted Through Dead Front Panel Hole
Cabinet Door
Dead
Front Panel
Dead Front
Panel Screws
Cabinet Door
Hex Nuts
