background image

76

EDA51 User Guide

About an Enterprise Data Reset

You can perform an Enterprise data reset if a Reboot did not improve the condition 
and all other troubleshooting methods have not resolved the issue. This method 
provides a clean configuration for troubleshooting by erasing all data from the 
Internal shared storage location on the computer. Data is not erased from the 
IPSM Card location.

Note:

This method of recovery may not be available if your system administrator has set 
policies to prevent the reset use. 

Before You Begin

If you recently reset your Google Account password, wait 24 hours before 
performing a Enterprise data reset.

Make sure you have your screen lock password, PIN or pattern if you activated 
one. You will need this to reset the computer.

If you have a Google Account, back up your data and settings to your Google 
Account so you can restore them if needed.

Connect the computer to an external power source or make sure you have a full 
battery charge.

Make sure you have an Internet connection.

Enterprise Data Reset the Computer

1. Swipe up from the bottom of the Home screen to access all apps.

2. Select 

Settings

  

System 

>

 Advanced > Reset options.

3. Tap 

Enterprise data reset.

4. Tap 

Reset Phone

.

5. If prompted, type your screen lock security pattern, PIN, or password and tap 

next (

).

Tap 

Erase Everything

. A message appears informing you an Enterprise data 

reset is being performed. 

Caution:  

 An Enterprise data reset results in data loss, only perform this 

procedure if all other recovery methods have failed. All personal 
content is erased including, but not limited to emails, pictures, 
contacts, Google account information, system settings and app 
settings.

Содержание ScanPal EDA51





































































































Отзывы: