22
Slave Controller Setup
No. of Controller : 0
/1~8
Dome Holding Time : 1~200sec ,Infinity
DVR Control : Enable
/ Disable
Camera Menu Access : Enable
/ Disable
Exit
Slave Controller Setup
(
Shft + Menu
, V ,V, V
è
Slave Controller Setup
)
V V V :
Push down the joystick until
SLAVE
CONTROLLER SETUP
menu
appears
Push the joystick to the right to enter
the SCHEDULE setup menu.
(See page 15
MAIN MENU
screen)
No. of Controller : 0,1~8
–
total No. of slave controllers
Dome Holding time : Master controller holds dome control as programmed time
DVR Control : Allow DVR control in the Slave controller.
Camera Menu Access : Allow camera menu in the Slave controller.
Clear saved Data : Clear all data in the Slave controller.
3.3 OPERATION THE CONTROLLER
3.3.1 Selection of the dome camera ( ID of the Dome Camera)
There are three ways for dome camera selection
,
and
(
Next
) or (
Prev
) . With these
selections, the keyboard controller has the full control of the selected dome camera.
3.3.2 Selection of the DVR (ID of the DVR)
A DVR must be selected before being controlled by the joystick controller.
Press Numeric button, then button to change DVR ID to be controlled.
<ex 1> Select DVR ID #3
Press numeric then button on the controller, DVR-003 will be
displayed on the LCD window.
<ex 2> Select DVR ID # 73
Press and then button, DVR-073 will be displayed on the LCD window.
1
,
DVR
3
DVR
7
3
DVR
