![background image](http://html.mh-extra.com/html/honeywell/scandome-htx-5000/scandome-htx-5000_instruction-manual_150278017.webp)
17
PORT SETUP MENU
Cam1
Cam2
Slave KBD
DVR
Alarm
Exit
CAM1 PORT SETUP MENU
Port Type : RS-485
/ RS-422
Device : Camera
/ Alarm / AUX IN/ IO
Baud Rate : 9600
/ 2400~230K
Save and Exit
NETWORKS
Slave ID : 1
Baud rate : 9600
Save and Exit
- Key Lock
: OFF~ 30Min - After elapsed setup time, keyboard locks automatically.
OFF - Disable Auto Key-Lock function.
User needs the login password to operate the Keyboard again.
- User Password - Simple operation (changing setup and programming disabled)
Password : Enter current user
’
s password.
New Password : Enter 1~8 digits new password.
Confirm Password : Confirm 1~8 digits new password.
- Admin Password - Fully accessible menu (changing setup and programming enabled)
Password : Enter current admin
’
s password.
New Password : Enter 1~8 digits new password.
Confirm Password : Confirm 1~8 digits new password.
Note) Factory default Administrator
’
s password is 9999+Enter and user password is 1111+Enter.
If you forget your own password, contact service personnel or distributor.
- Save and Exit Save the programmed data and return to the previous Menu
(Exit without saving if you press key)
PORT
(
Shft + Menu
è
PORT SETUP MENU
)
NETWORKS
(
Shft + Menu
è
NETWORKS
)
Master Controller mode
S8 ON : Slave Controller
Cam1
(
Shft + Menu
è
PORT SETUP MENU
è
Cam1
)
Port Type : Configure Port as
RS-485
or RS-422
Device : Select Device to be controlled (
Camera
/ DVR / None )
Baud Rate : Communication speed (2400/ 4800/
9600
/19200/ 38400/ 57600/ 11.5K /230K)
Save and Exit Press key to exit without saving the data.
ESC
ESC