Honeywell RTH6500, Руководство пользователя, Страница: 23 / 56

21
69-2715EF—07
Troubleshooting
Lost Signal
If the no-Wi-Fi indicator displays in place of the
Wi-Fi strength indicator in the upper right hand
corner of the home screen:
• Check another device to be sure Wi-Fi is
working in your home; if not, call your Internet
Service Provider.
• Move the router.
• Restart the thermostat: remove it from the
wallplate, wait 10 seconds, and snap it
back onto the wallplate. Return to Step 1 of
Connecting to your Wi-Fi network.
M33997 M33997
Error Code Action
E01
During Wi-Fi Setup, the router
lost power.
• Ensure your router has power.
• If trying to connect to a hidden or manually added network,
confirm the router has power and is working.
E02
Invalid Wi-Fi password. This
code displays for 30 seconds,
then the thermostat will re-enter
Wi-Fi Setup
mode.
• Re-enter password for your home Wi-Fi network.
• Repeat setup process and confirm your password for your home
Wi-Fi network.
Error Codes
For certain problems, the thermostat screen will display
a code that identifies the trouble. Initially, error codes are
displayed alone in the time area of the screen; after a
few minutes, the home screen is displayed and the code
alternates with the time.
M33999
M33998
Error Code Action
E42
Router is not issuing
an IP address to the
thermostat.
• Wait for 30 minutes, connection can take
several minutes.
• If still no connection, remove thermostat
from wallplate for 10 seconds, then
reconnect it (see page 10).
• Verify your router is correctly setup to
automatically give IP addresses.
E43
No internet connection.
Thermostat cannot
communicate to Total
Connect Comfort.
• Make sure the Internet cable is plugged
in.
• Reboot the router.
E99
General error Remove thermostat from wallplate for
10 seconds, then reconnect it (see page
10).