RDD100 User Guide
www.honeywell.com 7
Sequence #3:
If both RDD100 and transducer are operating normally before an over/under-range condition is detected, the
RDD100 will continue to display the valid last reading prior to the error condition. The error LED will not be lit.
4
POWER REQUIREMENTS
4.1
Voltage
12 ± 3 VDC
4.2
Current
4.2.1 Operating
….170 mA (Transducer and RDD100 together)
4.2.2 @ Start-Up
.350 mA
4.3
Power Connection
2.1 x 5.5 x 10 mm (I.D. x O.D. x length)
5
OPERATING ENVIRONMENT
5.1
Operating Temp Range
-20ºC to +60ºC
5.2
Storage Temp Range
-25ºC to +85ºC
5.3
Relative Humidity
0% to 90%, non-condensing
6
DIMENSIONS
6.1
Overall
3.8 in. W x 2.0in.H
6.2
Panel Cutout Dimensions
3.58 in. W x 1.77in.H
6.3
Depth Behind Panel
….
4.5 inches (not including connectors and cables)
RDD100 Connections
(1) This cable allows a personal computer, with suitable software, to communicate through the RDD-100 to the transducer.
Data can be logged and transducer parameters set/reviewed. Length of cable can be chosen when the RDD100 is ordered.
(At the PC, USB to RS-232 converters can be used.)
(2) Separate cables are available for transducers with Metal or Plastic electrical connectors.
Standard cable length is 6 feet (1.8 m). Connectors may be purchased from Honeywell to construct custom-length cables.
Due to RS-232 limitations, recommended maximum length is 50 ft (15 m).
(3) 12 VDC plug is 2.1 x 5.5 x 10 mm (I.D. x O.D. x length)
Center pin may be either positive or negative polarity.
RDD100
Wall-
mounted
12V DC
supply
Honeywell RS-232
Pressure Transducer
Personal Computer
(1)
9-pin cable, 6 or 10 ft.
(2)
6 ft. transducer cable
Figure 1, RDD100 Connections
(1) This cable allows a personal computer, with suitable software, to communicate through the
RDD-100 to the transducer. Data can be logged and transducer parameters set/reviewed.
Length of cable can be chosen when RDD100 is ordered.
(At the PC, USB to RS-232 converters can be used.)
(2) Separate cables are available for transducers with Metal or Plastic electrical connectors.
Standard cable length is 6 feet (1.8 m). Connectors may be purchased from Honeywell to construct
custom-length cables.
Due to RS-232 limitations, recommended maximum length is 50 ft (15 m).
1/A
2/B
4/D
5/E
1 2 4 5
(3)
2 3 5
C
O
M
S
e
r
i
a
l
(3) 12 VDC plug is 2.5 x 5.5 x 10 mm (I.D. x O.D. x length)
Center pin may be either positive or negative polarity.
