Honeywell Rapid Eye Hybrid LT, Руководство по установке

Страница: 21 / 86

Rapid Eye™ Hybrid LT DVR Installation Guide
Document 800-07766V4 Rev A 21
01/2013
Communications
Connect the Hybrid LT DVR either to a network, to a telephone line, or both (see Figure 1-1
for connection details).
Figure 1-1 Telephone Line (TELCO, North America Only) or Network (LAN)
For more information, see Testing a Dial-Up Connection in the Field on page 40 .
equIP HD4MWIH V10.1+      
equIP HCD5WIH V10.1+      
ONVIF IP Cameras
a
V10.1+      
a
Some third party ONVIF IP cameras have been tested and are supported by Rapid Eye Hybrid LT V10.1 units. For a complete list
of supported IP cameras, including Honeywell cameras and ONVIF IP cameras, see the Honeywell Open Technology Alliance
web page (
http://www.security.honeywell.com/hota ). For more information on setting up supported ONVIF IP cameras, and their
features, refer to the Rapid Eye™ Hybrid HD and Hybrid LT Digital Video Recorders System Administrator Guide , which can be
found on the documentation CD that came with your unit.
Table 1-1 Supported IP Cameras (cont’d)
Supported Features
Camera Model
Software
Versions that
support
H.264
Streaming
MPEG4
Streaming
Tamper
Detection (CSD
Analytics)
Motion
Detection
GPIO PTZ
SERIAL PORT 2
SERIAL PORT 1 VGA
TELCO
USB USB
LAN
IN
OUT
NOT
USED
1 2 3 4 5 6 7 8
SPOT
MONITOR
VIDEO
INPUTS
COMMON
SYS FAIL
SYS GOOD
F AULT
RE LAY
28V, 3A
MAX
1 G G G G 2 3 4
CONTROL
OUTPUTS
SERIAL
PORT 3
SERIAL
PORT 4
1 G G G G 2 3 4 5 G G G G 6 7 8
ALARM INPUTS
ON/OFF
POWER
115-230V~
50/60 Hz
5-3A
VIDEO connector on
analog camera to
VIDEO INPUT on DVR
Connect a telephone line to the
TELCO port and/or connect an
RJ45 (ethernet) cable to the LAN
port on the DVR
8-channel
Hybrid LT
unit