Honeywell PX4ie Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 108

Honeywell PX4ie Скачать руководство пользователя страница 73

PX4ie and PX6ie High Performance Printer User Guide

63

a. Select

Install Resources

.

b. Select the file you want to install and wait until the item turns gray and a

checkmark appears next to it. The file is now successfully installed in the
printer.

c. Continue to another file if you have more files to install.

Change Background Image for the Ready Screen

You may customize the Ready screen that appears on the printer. The background
image you create must be:

•

320 x 234 pixels.

•

named

background_idle.png

.

1.

Create a /display directory on your USB storage device.

2.

Copy your

background_idle.png

file to the

/display

directory on the USB

storage device.

3.

Insert the USB storage device into one of the USB host ports on the printer.

4.

If you have an icon printer the file is automatically uploaded to the /home/
user/display directory on the printer.

5.

If you have a full touch printer, use the USB Device menu to upload the file to
the printer.

6.

Restart the printer.

The new image file you uploaded appears in place of the original Ready screen.

Printer Profiles

You can save updated printer default settings as a printer profile. The printer
supports multiple profiles that can be saved and loaded at any time. For example,
you can create one profile to use when you are printing on continuous label stock,
and a different profile to use when you are printing on label stock with gaps.

The following printer settings are not saved in a profile:

•

IP address for either IPv4 or IPv6 networks

•

Media calibration settings for the label stop sensor

•

Remote port or remote host values for a remote computer accessing the printer
through raw TCP

Save a Printer Profile from the Web Page

From the printer web page, you can save the current settings as a profile that you
can load from the printer memory at any time.

«
...
71
72
73
74
75
...
»

Содержание PX4ie













































































































Отзывы:

Нет отзывов