Honeywell PRO3200 Скачать руководство пользователя страница 6

Notices

Limited Warranty 

PRO3200 Two-Reader Module Installation Guide

Document 800-15493

vi

immediately notify Honeywell in writing of all such claims. Honeywell shall defend 
or settle such claims and shall indemnify and hold Customer harmless for any costs or 
damages including reasonable attorneys' fees which Customer may be required to pay 
as a result of the defective Product or the negligence of Honeywell, its agents, or its 
employees. 
Customer shall hold harmless and indemnify Honeywell from and against all claims, 
demands, losses, and liability arising out of damage to property or injury to persons 
occasioned by or in connection with the acts or omissions of Customer and its agents 
and employees, and from and against all claims, demands, losses, and liability for 
costs of fees, including reasonable attorneys' fees, in connection therewith.

Limited Warranty 

All Products sold or licensed by Honeywell include a warranty registration card which 
must be completed and returned to Honeywell by or on behalf of the end user in order 
for Honeywell to provide warranty service, repair, credit or exchange.  All warranty 
work shall be handled through Customer which shall notify Honeywell and apply for a 
Return Merchandise Authorization (RMA) number prior to returning any Product for 
service, repair, credit or exchange.  NewWatch warrants that its Products shall be free 
from defects in materials and workmanship for a period of two years from date of 
shipment of the Product to Customer. The warranty on Terminals, Printers, 
Communications Products and Upgrade kits is 90 days from date of shipment. 
Satisfaction of this warranty shall be limited to repair or replacement of Products 
which are defective or defective under normal use. Honeywell’s warranty shall not 
extend to any Product which, upon examination, is determined to be defective as a 
result of misuse, improper storage, incorrect installation, operation or maintenance, 
alteration, modification, accident or unusual deterioration of the Product due to 
physical environments in excess of the limits set forth in Product manuals. THERE 
ARE NO WARRANTIES WHICH EXTEND BEYOND THIS PROVISION. THIS 
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS, 
IMPLIED OR STATUTORY, INCLUDING IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. NO 
REPRESENTATION OR WARRANTY OF THE DISTRIBUTOR SHALL EXTEND 
THE LIABILITY OR RESPONSIBILITY OF THE MANUFACTURER BEYOND 
THE TERMS OF THIS PROVISION. IN NO EVENT SHALL HONEYWELL BE 
LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROFITS, LOSS OF 
USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES TO ANY 
PERSON RESULTING FROM THE USE OF NEWWATCH’S PRODUCTS. 

Confidentiality 

All software, drawings, diagrams, specifications, catalogs, literature, manuals and 
other materials furnished by Honeywell relating to the design, use and service of the 
Products shall remain confidential and shall constitute proprietary rights of Honeywell 
and Customer agrees to treat such information as confidential. Customer shall acquire 
no rights in the design of the Products or the related materials except to use such 
information solely for the purpose of and only during the time it sells the Products. 
Customer shall not copy the design of any of the Products or use or cause to be used 
any Product design or related materials for its own benefit or for the benefit of any 

Содержание PRO3200




























Отзывы: