manualshive.com logo in svg

Honeywell Prestige IAQ YTHX9421, Руководство по установке, Страница: 16 / 16

Поделиться
Скачать
Honeywell Prestige IAQ YTHX9421 Скачать руководство пользователя страница 16

Automation and Control Systems 

Honeywell International Inc. 
1985 Douglas Drive North 
Golden Valley, MN  55422 
http://customer.honeywell.com

® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2739—01  M.S. 11-12
Printed in U.S.A.

69-2739-01

TM

DISCONNECT POWER BEFORE INSTALLATION.

 Can cause electrical shock or 

equipment damage.

This thermostat contains a Lithium battery which may contain Perchlorate 

material.

 Perchlorate Material—special handling may apply.  

See www.dtsc.ca.gov/hazardouswaste/perchlorate

MERCURY NOTICE:

 If this product is replacing a control that contains mercury in a 

sealed tube, do not place the old control in the trash. Contact the Thermostat Recycling 

Corporation at www.thermostat-recycle.org or 800-238-8192 for information on how and 

where to properly and safely dispose of your old thermostat.

Must be installed by a trained, experience technician.

 Read these instructions 

carefully. Failure to follow these instructions can damage the product or cause a 

hazardous condition.

Need Help?

For assistance please visit

http://customer.honeywell.com

,

or call toll-free:

1-800-468-1502

 (residential installation)

1-888-245-1051

 (commecial installation)

Scan for more information

Содержание Prestige IAQ YTHX9421

















Отзывы:

Нет отзывов