Honeywell PM42 Скачать руководство пользователя страница 80

Страница: 80 / 110

Chapter 6 — Maintain the Printer

PM42 Industrial Label Printer User Manual

Adjust the Printhead Balance

The printhead is adjusted for full-width media. If you are using media that
is less than full-width (4 inches or 102 mm), adjust the position of the
printhead balance arm so that the printhead is correctly pressured
against the media.

Open the media cover.

If you have ribbon installed, remove the ribbon.

Turn the printhead lift lever counterclockwise to raise the printhead.

Press down on the blue part of the printhead balance bar and move
it:

•

outward for wider media.

•

inward for narrower media.

Close the printhead and load the ribbon.

Test and readjust the printhead balance if necessary.

Close the media cover.

V10 CONSUMIBLES S.L.

Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309

Содержание PM42















































































































Результаты поиска

Содержание PM42

Отзывы:

Honeywell PM42, Руководство пользователя, Страница: 80 / 110

Результаты поиска

Содержание PM42

Отзывы: