Honeywell PEHA 940 AMA Скачать руководство пользователя страница 4

GB - 2

PEHA Elektro GmbH & Co. KG

Postfach 1727 • D-58467 Lüdenscheid • Tel.: (02351)185-0 • Fax: (02351)27666 • e-mail: [email protected] • Internet: www.peha.de

 

PEHA_M_940_AMA (Rev05_130219)

126005-04

sTAnD-ALone moDe

Functions of the coding switch

1 = switch on, 0 = switch oFF

switch Function

setting

Parameter

1

Selection of the adjustment 

time of the soft start function

0 x x x x

Short soft start

1 x x x x

Soft start (2.56 s)

2 + 3

Setting the adjustment 

times of the dimmer 

x 0 0 x x

4 seconds

x 1 0 x x

6 seconds

x 0 1 x x

8 seconds

x 1 1 x x

10 seconds

4 + 5

Selection of the characteristics 

curve of the dimmer

x x x 0 0

Light bulb  1-10V

x x x 1 0

EVD 5-10V

x x x 0 1

Linear 1-10V

Input function of the 230 v inputs 

I

0-

I

5

Input short activation

Button pressed less (<) 1 sec.

Long activation

Button pressed longer (>) 1-2 sec.

I

0

ON to 100% brightness 

(with soft start function)

button pressed >1 sec:

Dimming UP

I

1

OFF

button pressed >1 sec:

Dimming DOWN

I

2

Call up DIA 1

button pressed >2 sec:

Saving the set value for DIA 1

I

3

Call up DIA 2

button pressed >2 sec:

Saving the set value for DIA 2

I

4

ON with memory value / OFF

button pressed >1 sec:

 

Dimming UP/DOWN

I

5

ON with regulation by light 

sensor / OFF

(Connection of the light sensor 

at the analogue input at terminal 

5, 6, 7 !)

button pressed >2 sec:

 

Saving the light value as control set value 

and activating the control! 

(Specifying a control set value by one 

of the buttons described above)

wArrAnTy conDITIons

These operating instructions are an integral part of both the device and our terms of 

warranty. They must be handed over to the user. The technical design of the appliance 

is  subject  to  change  without  prior  notification. 

PEHA

 products are manufactured 

and quality-checked with the latest technology according to applicable national and 

international regulations. Nevertheless, if a product should exhibit a defect, 

PEHA

 

warrants to make remedy as follows (regardless of any claims against the dealer to 

which the end user may be entitled as a result of the sales transaction):

In the event of a justified and properly established claim, 

PEHA

 shall exercise its 

prerogative to either repair or replace the defective device. Further claims or liability 

for consequential damage are explicitly excluded. A justifiable deficiency is deemed to 

exist if the device exhibits a structural, manufacturing, or material defect that makes it 

unusable or substantially impairs its utility at the time it is turned over to the end user. 

The warranty does not apply to natural wear, improper usage, incorrect connection, 

device tampering or the effects of external influences. The warranty period is 24 months 

from the date of purchase by the end user from a dealer and ends not later than 36 

months after the device’s date of manufacture. German law shall be applicable for the 

settlement of warranty claims.

DIsPosAL oF The DevIce

Do not dispose of old devices in the household waste! The device must be 

disposed of in compliance with the laws and standards of the country in which it 

is operated! The device contains electrical components that must be disposed 

of as electronics waste. The enclosure is made from recyclable plastic.

Содержание PEHA 940 AMA

Страница 1: ...alogausgang 0 1 2 3 Schraubklemmen für Analogeingang 5 6 7 6 Schraubklemmen für Taster I0 I5 Schraubklemmen max 2 x 1 5 mm Prüfvorschriften EN 60669 2 1 Approbationen KEMA KEUR CE CEBEC Schutzart IP 20 Abmessungen Breite 108 mm 6TE Höhe 55 mm Beschreibung Das PHC Analogmodul hat einen Schaltausgang 10A mit Nullspannungsschalter zum Ein Ausschalten von maximal 5 EVGs Es benötigt eine eigene Stromve...

Страница 2: ...des Gerätes und der Garantiebedingungen Sie ist dem Benutzer zu überreichen Die technische Bauart der Geräte kann sich ohne vorherige Ankündigung ändern PEHA Produkte sind mit modernsten Technologien nach geltenden nationalen und internationalen Vorschriften hergestellt und qualitätsgeprüft Sollte sich dennoch ein Mangel zeigen übernimmt PEHA unbeschadet der Ansprüche des Endverbrauchers aus dem K...

Страница 3: ...ue input 5 6 7 6 screw terminals for button I0 I5 Screw terminals max 2 x 1 5 mm Test specifications EN 60669 2 1 Certifications KEMA KEUR CE CEBEC Protection level IP 20 Dimensions Width 108 mm Height 55 mm Description The PHC analogue module has an switch output 10 A with a no voltage releasing magnet to switch up to 5 electronic ballasts The module requires its own power supply of 230V 50Hz The...

Страница 4: ...l part of both the device and our terms of warranty They must be handed over to the user The technical design of the appliance is subject to change without prior notification PEHA products are manufactured and quality checked with the latest technology according to applicable national and international regulations Nevertheless if a product should exhibit a defect PEHA warrants to make remedy as fo...

Отзывы: