background image

NFN-GW-EM-3 Installation and Operation Manual —

 P/N LS10017-000NF-E:D1  5/1/2019

25

Configuring the NFN-GW-EM-3

Configuration

3.2.3  Main Menus

The following table describes the options available in the configuration tool main menus (see Figure 3.1).

Table 3.1  Main Menus

Menu

Option

Description

File

Reboot

Reboots the NFN-GW-EM-3.

View

History

Displays a window containing a historical list of error messages.

Node Table

Displays a window containing software version information for all monitored 
nodes.

Connected 
Clients

Displays a window containing IP address and description information for 
clients connected to the NFN-GW-EM-3.

Tools

Set Device

 

Password

Displays a dialog box allowing the user to change the current password.

• Passwords are case sensitive.
• Alpha and numeric characters are supported.
• Eight (8) characters minimum, 64 characters maximum.

Backup...

Click to download a backup file (.bkp) from the gateway to the PC running the 
browser. Save or move the file to an appropriate location so it can be used, if 
necessary, to restore the gateway settings.

Restore...

Browse to (or search for) the backup file on the PC running the browser. Click 

Open

 and then 

Send

. An on-screen message indicates a successful 

restoration.

Send PFX Key 
File

Opens a dialog box allowing the user to upload an SSL Certificate File. 
Browse for the file, enter the password (if required), and click Send. Refer to 

3.3, "Security Certificate"

.

Auto Detect 
Nodes

Select to cause the gateway to automatically detect all connected nodes.

Web Portal

Commission 
Web Portal

Selecting this option causes the web portal to request the point information 
from the FACP(s) to update the information on the eVance server.

Unregister
Web Portal

Used prior to removing the web portal from the FACP connection. 

Upgrade

Firmware

Opens the Send Archive File dialog box. Click the 

Choose

 button

and select the filename that begins with “

NGNUW

” and has the 

extension“.AR”. Click 

Open

 and then click 

Send

. An on-screen message 

indicates a successful upgrade. It is recommended that the browser be 
restarted after the upgrade.

Language

Displays a dialog box from which the user can navigate to, and select the 
desired language file.

Help

Legal

Displays legal information pertaining to the NFN-GW-EM-3.

About

Displays version information pertaining to the NFN-GW-EM-3.

Advanced 
Diagnostics

Used for informational/diagnostic purposes.

Содержание Notifier NFN-GW-EM-3



































Отзывы: