12
NFN-GW-EM-3 Installation and Operation Manual —
P/N LS10017-000NF-E:D1 5/1/2019
Product Overview
Agency Listings
1.8 Agency Listings
1.8.1 Standards
1.8.2 Agency Restrictions and Limitations
• If this product is sharing on-premises communication equipment, the shared equipment shall be “listed for the purpose”. “Listed for
the purpose” has been formally interpreted by NFPA (Formal Interpretation 72-99-1) for equipment on packet switched networks as
being listed to the requirements applicable to general purpose communications network equipment.
• The web portal feature is listed for supplementary use only.
Compliance
- This product has been investigated to, and found to be in compliance with, the following standards:
National Fire Protection Association
Underwriters Laboratories
• UL 864
• UL
1076
National Fire Alarm and Signaling Code
Control Units for Fire Alarm Systems, Tenth Edition
Proprietary Burglar Alarm Units and Systems, Fifth Edition
(Certified Applications Only)
General Purpose Signaling Devices and Systems,
Second
Edition
Mass Notification Systems,
Second
Edition
Underwriters Laboratories Canada
•
CAN/ULC S527-11
Standard for Control Units for Fire Alarm Systems, Third Edition
•
CAN/ULC S559-13
Standard for Equipment for Fire Signal Receiving Centres and Systems, Second Edition
Installation
- This product is intended to be installed in accordance with the following:
Local
• AHJ
Authority Having Jurisdiction
National Fire Protection Association
• NFPA 70
National Electrical Code
• NFPA 72
National Fire Alarm and Signaling Code
•
NFPA 101
Life Safety Code
Underwriters Laboratories Canada
•
CAN/ULC S524
Installation of Fire Alarm Systems
•
CAN/ULC S561
Installation and Services for Fire Signal Receiving Centres and Systems
Canada
• CSA C22.1
Canadian Electrical Code, Part I, Safety Standard for Electrical Installations
•
NFPA72
• UL
2017
• UL
2572