Honeywell Notifier AMPS-24/E Скачать руководство пользователя | Manualshive

Страница: 51 / 52

background image

Manufacturer Warranties and Limitation of Liability

Manufacturer Warranties.

Subject to the limitations set forth herein,

Manufacturer warrants that the Products manufactured by it in its
Northford, Connecticut facility and sold by it to its authorized
Distributors shall be free, under normal use and service, from defects
in material and workmanship for a period of thirty six months (36)
months from the date of manufacture (effective Jan. 1, 2009). The
Products manufactured and sold by Manufacturer are date stamped at
the time of production. Manufacturer does not warrant Products that
are not manufactured by it in its Northford, Connecticut facility but
assigns to its Distributor, to the extent possible, any warranty offered
by the manufacturer of such product. This warranty shall be void if a
Product is altered, serviced or repaired by anyone other than
Manufacturer or its authorized Distributors. This warranty shall also
be void if there is a failure to maintain the Products and the systems in
which they operate in proper working conditions.

MANUFACTURER MAKES NO FURTHER WARRANTIES, AND
DISCLAIMS ANY AND ALL OTHER WARRANTIES, EITHER
EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS,
TRADEMARKS, PROGRAMS AND SERVICES RENDERED BY
MANUFACTURER INCLUDING WITHOUT LIMITATION,
INFRINGEMENT, TITLE, MERCHANTABILITY, OR FITNESS FOR
ANY PARTICULAR PURPOSE. MANUFACTURER SHALL NOT BE
LIABLE FOR ANY PERSONAL INJURY OR DEATH WHICH MAY
ARISE IN THE COURSE OF, OR AS A RESULT OF, PERSONAL,
COMMERCIAL OR INDUSTRIAL USES OF ITS PRODUCTS.

This document constitutes the only warranty made by Manufacturer
with respect to its products and replaces all previous warranties and is
the only warranty made by Manufacturer. No increase or alteration,
written or verbal, of the obligation of this warranty is authorized.
Manufacturer does not represent that its products will prevent any loss
by fire or otherwise.

Warranty Claims.

Manufacturer shall replace or repair, at

Manufacturer's discretion, each part returned by its authorized
Distributor and acknowledged by Manufacturer to be defective,
provided that such part shall have been returned to Manufacturer with
all charges prepaid and the authorized Distributor has completed
Manufacturer's Return Material Authorization form. The replacement
part shall come from Manufacturer's stock and may be new or
refurbished. THE FOREGOING IS DISTRIBUTOR'S SOLE AND
EXCLUSIVE REMEDY IN THE EVENT OF A WARRANTY CLAIM.

Warn-HL-08-2009.fm

AMPS-24 Manual —

P/N 51907:J2 02/26/2014

51

«
...
49
50
51
52
»

Содержание Notifier AMPS-24/E





















































Отзывы:

Нет отзывов

Похожие инструкции для Notifier AMPS-24/E

Бренд: JVA Страницы: 22

COILTHREAD KFS-30

Бренд: Kato Страницы: 2

Бренд: Wel-Bilt Страницы: 7

7539-300X Series

Бренд: Avdel Страницы: 47

Бренд: Fein Страницы: 125

Greenlee INLNPRESS-TOOL19kN

Бренд: Textron Страницы: 12

Бренд: Fein Страницы: 58

Бренд: Parkside Страницы: 202

Бренд: New Trent Страницы: 2

Бренд: Mengual Страницы: 68

Бренд: RED ROOSTER Страницы: 8

Бренд: blackburn Страницы: 8

Бренд: Dynabrade Страницы: 18

Бренд: Truper Страницы: 24

Бренд: H3C Страницы: 8

Бренд: Tripp Lite Страницы: 2

Бренд: XPOtool Страницы: 5

Бренд: Hama Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды