manualshive.com logo in svg

Honeywell N86 Series, Руководство пользователя, Страница: 200 / 218

Поделиться
Скачать
Honeywell N86 Series Скачать руководство пользователя страница 200

11 - 2

•

The engine may not be programmed for the appropriate terminal interface. 
For example, you scan “12345” and the host displays “@es%.”

Reprogram the engine with the correct Plug and Play or Terminal selection 
bar code.  See 

Chapter 2

 and 

Chapter 3

.

The engine may not be programmed to output your bar code data properly.
For example, you scan “12345” and the host displays “A12345B.”

Reprogram the engine with the proper symbology selections.  See 

Chapter 6

.

The engine won’t read your bar code at all.

1. Scan the sample bar codes in the back of this manual.  If the engine reads 

the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see 

Chapter 6

).  

2. If the engine still can’t read the sample bar codes, scan 

"All Symbologies" on 

page 6-2

.

If you aren’t sure what programming options have been set in the engine, or if 
you want the factory default settings restored, scan 

Resetting the Factory 

Defaults

on page 1-7.

Содержание N86 Series



























































































































































































































Отзывы:

Нет отзывов