Chapter 2 - Planning
2.6.21
Mouse and keyboard
The USB mouse, a standard cursor control device and an USB standard PC keyboard are included with
the Dell T130.
2.6.22
Monitor
The Honeywell-based Dell T130 server supports industrial standard video format (typically 1024X768 at
a refresh rate of 75Hz). You must use a multisync monitor along with the Dell T130 server platform
operating system. The server can be configured only with a single screen option. In this configuration,
the monitor is connected to the AGP video controller output connector. Note that no touch screen option
is available for this server platform.
2.6.23
Video cable
Correct system startup and operation of the Honeywell-based Dell T130 server platform requires
industry standard VESA DDC interface to the monitor. If either a monitor or video cable that does not
support DDC is attached to the server platform, the display generator defaults to a resolution, which
precludes communication with the system software and stops startup. To determine if a cable is DDC
compatible, ensure that pins 5, 9, and 12 of the HD15 connector are wired. The IS supplied cable
(51196742-200) is DDC compatible.
2.7
Industrial regulatory compliance
The compliance specifications in this section apply to cabinet installations.
WARNING
Honeywell does not claim Safety Compliance or Electromagnetic Compatibility (EMC)
Compliance for system equipment configurations that have not been described in this guide as
standard system configurations. Any equipment configuration other than that described in this
publication decertifies the Safety and EMC compliance of this product.
l
l
2.7.1
Electromagnetic Compatibility
The following table provides the Electromagnetic Compatibility (EMC) specifications (Industrial
Regulatory) for European community.
Element
Description
Emissions
EN 61326-1:2006 (Industrial Locations, CISPR 11, Class A)
Immunity
EN 61326-1:2006 (Industrial Locations)
- 20 -
