10
USE & OPERATION
Touch Screen Control Panel
Timer Control
Fan Speed Control
Timer / Temperature Set Controls
Warning Light (when flashing)
Power Control
Mode Control
Power Control
The Power Control turns the unit on and off.
Mode Control
3 settings: Cool, Dehumidify and Fan
A light will indicate which setting is currently being used.
The unit works as an air conditioner. Adjust fan speed
and air temperature to suit your desired comfort level.
Temperature setting range is 61°F~89°F.
Air is dehumidified as it passes through the unit, without
being in full cooling mode. If room temperature is higher
than 77°F fan speed can be adjusted; otherwise fan
speed is preset "LOW".
With machine in running mode, press timer button to
select the number of hours you want the unit to run in air
conditioning mode.
Note : If the unit will be used mainly as a dehumidi-
fier, do not connect the exhaust hose and let the
warm air return in the room. Continuous drainage is
then necessary and more efficient (refer page 14,
For air circulation without cooling.
3 settings: High, Medium and Low.
Timer Control
Auto turn off:
With machine in stand by mode, press the timer button
to select the number of hours until you want the unit to
automatically start running.
Auto turn on:
In cooling mode, when “ “ or “ “ button is pressed,
the set temperature is displayed and may be adjusted.
After 10 seconds the display will revert back to room
temperature.Temperature is only adjustable in cool
mode.
The time is adjustable between 1~24 hours.
Note : By pressing both “ “ / “ “ set buttons at the same
time, the display will toggle between Celsius and
Fahrenheit.
Temperature / Timer Set Controls
Condensed water may accumulate in the unit. If the
internal tank becomes full, the Power Light will flash and
the unit will not operate until the unit has been drained
(refer page 14, Water Condensation Drainage).
Warning Light
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
