Honeywell MAXPRO 2.5, Руководство по установке

Страница: 72 / 77

A P P E N D I X
Setting Up Antivirus Software for MAXPRO NVRs
74 MAXPRO NVR Commissioning and Installation Guide
A
Setting Up Antivirus Software for MAXPRO
NVRs
Honeywell supports installing the following Antivirus software on MAXPRO NVRs.The following
Antivirus applications have been tested, and function well with the MAXPRO NVR operational
parameters.
• McAfee VirusScan Version 8.8, McAfee Antispyware
• Microsoft Security Essentials
• Symantec AntiVirus Edition 2008 (Norton), 2010
• Sophos v7.3.0
• AVG v8.5.409
Auto-protection and Auto-updates
Auto-protection (Live file-system protection) is recommended along with auto-updating
through the Internet or a Network Virus Definition Server. When using auto-update, it may be
necessary to reboot the NVR for some of the patches/updates to take effect. This is not
normally needed during standard virus definition updates; however, occasionally Antivirus
Software Engine updates trigger that require system reboots. In this scenario, it is suggested
that, if the Antivirus software is installed and configured on an NVR system, auto-updates are
disabled and updates need to be done manually by the operator to manage the reboots.
IMPORTANT! Do Not Schedule DATA Drive Scans
Do not set the Antivirus software to run any scheduled hard disk scans of DATA (Video
Storage) drives. This can hinder the performance of the NVR unit and cause other potential
problems. In particular:
• The NVR software is CPU and Memory dependant. Having antivirus software scan
DATA (Video Storage) drives while recording video can cause degradation of
recording performance.
• Scanning DATA (Video Storage) drives can also create a problem due to the DATA
files constantly being updated and written to. The virus software will attempt to re-
scan these files after each data change as video is being saved.