Honeywell LYNXDM-GSM, Инструкция по установке и настройке, Страница: 7 / 16

- 7 -
Programming the LYNXDM-GSM or LYNXDM-IGSM
1. Refer to the Programming Guide provided with the LYNXDM-GSM or LYNXDM-IGSM Communications
Module for additional information regarding programming and registration.
2. When programming is complete, snap the front case and the attached LYNXR-I Series control to the rear
case of the wall or desk mount.
Specifications
Mechanical
Dimensions: 8.5" x 6.25" x 1.5" (Wall Mount)
8.5" x 6.25" x 2.625" (Desk Mount)
Electrical
Current Drain: 35mA average standby, 500mA peak transmit
Module Fault Relay Output: Open collector, 12VDC, .25W max.
Input Trigger Levels:
(V+) 2V – 13V
(V-) 0V – 1V
RF
Transceiver Type: Tri-Band GSM/GPRS Class 10
Modulation: GMSK
Antenna: Internal GSM quad-band antenna 1.3 dBi gain
Band
Transmission
Frequency
(MHz)
Transmit
Power
(dBm)
Receive
Frequency
(MHz)
Receive
Sensitivity
(dBm)
Number
of
Channels
Channel
Spacing
(MHz)
Duplex
Separation
(kHz)
GSM 850 824-849 33 869-894 -107 124 200 45
GSM 1800 1710-1785 33 1805-1880 -106 374 200 95
GSM 1900 1850-1910 33 1930-1990 -105.5 299 200 80
Ethernet (LYNXDM-IGSM)
Network Standard: IEEE 802.3u compliant
Data Rate: 10Base-T / 100Base-T with auto detect
Ethernet Cable: Cat. 5 (min), MDI/MDI-X auto crossover
Environmental
Operating temperature: -20º to +55ºC
Storage temperature: -40º to +70ºC
Humidity: 0 to 95% relative humidity, non-condensing
Altitude: to 10,000 ft. operating, to 40,000 ft. storage