Limitless™
WDRR Receiver
Issue 1,
50063987
Honeywell Sensing and Control
5
2.2
Certification and Approvals
See the product label for applicable approvals and ratings.
Table 7 – Approvals and Ratings
Approval/Item
Ratings/Description
Enclosure type
IP20
Federal Communications Commission (FCC)
FCC Part 15.247
Industry Canada (IC)
Canadian ICES-003
European Telecommunications Standards Institute (ETSI)
CE mark
Australian Communications and Media Authority (ACMA)
C-Tick mark
Comision Federal de Telecomunicaciones (COFETEL)
Mexico RCPDIXBIO-1147
Wireless Planning & Coordination (WPC)
India 1001/2011/WLRO-006
WARNING
*
The WDRR must be installed in accordance with the requirements specified in this document in order
to comply with the specific Country Communication Agency requirements. (i.e. FCC, IC, ETSI, ACMA,
etc.) See Section 3 as it requires choosing the correct Country Use Code and thus allowable antenna
and/or cable usage.
2.3
Radio Module Specifications
Table 8 – Radio Module Specifications
Item
Specification
Radio module
Digi International XBee –PRO
®
Wireless standard
WPAN IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS), 2.4 GHz
Data rate
250 kbps
Operating frequency
ISM 2.4 GHz
Module transmit power
(max.)
Country code “A”: 20 dBm
Country code “B”: 8 dBm
Receive sensitivity (typ.)
-100 dBm
# of pairing (max.)
Up to 14 Limitless™ inputs can be paired to a single WDRR
2.4
Electrical Specifications
Table 9 – Electrical Specifications
Item
Specification
Supply voltage
10 Vdc to 28 Vdc
Supply current
500 mA max.
Output type
NPN current sinking, open collector or NPN “totem pole”;
PNP current sourcing open collector or PNP “totem” pole
Output voltage
Supply voltage minus 1.4 Vdc
Load current
10 mA max.
Leakage current
100 uA max.
Voltage drop
2.0 Vdc max. @ max. load @ 25 °C [77 °F]
Termination
Cage-clamp screw terminal blocks
