Limitless™
WDRR Receiver
Issue 1,
50063987
Honeywell Sensing and Control 13
5.4
Lost RF Link output LED
Refer to Figure 2.
The lost RF link output LED indicates when any one or more of the Limitless™ inputs
has lost the RF link or communication with the WDRR. The LED will change state as shown below.
RF Link switch position 0-9, A-E
Lost RF Signal LED status
Condition
Solid green
Acceptable RF link(s)
Solid red
Lost RF link(s)
RF Link switch position F
Sequence each LED color
LED test mode
5.5
RF Link Strength LEDs
Refer to Figure 2.
The five (5) blue LEDs indicate the RF link strength of the Limitless™ input when
communicating (i.e. Limitless™ input change of state/actuation) with the WDRR receiver. One (1) blue LED
illuminated indicates a weak RF link. And increasing number of blue LEDs illuminated indicates a stronger
RF link.
5.6
Configuration LEDs
Refer to Figure 2.
The Function button
allows the Limitless™ WDRR Receiver to enter many different
configuration modes such as set-up, pairing, purge, etc. The configuration LEDs
indicate both different
modes as well as different states. See Section 6 for more detail.
