Mounting and connection instructions for readers with scrambling keypad
10
Safety instructions
Read the instructions carefully and completely before installing and operating the unit. They contain
important information on installation, programming and operation.
The unit is constructed according to the state of the art of technology. It should only be used:
- for its intended purposes and in accordance with regulations and
- in good technical condition, properly installed and
- according to specifications.
The manufacturer assumes no liability for damages arising from use which does not comply with
regulations and the intended purpose of the unit.
Installation, programming, maintenance and repairs must only be performed by authorized technical
personnel.
Soldering and connection work in the entire system should only be performed in a voltage-free state.
Soldering must be done only with a temperature-controlled, electrically isolated soldering iron.
VDE safety guidelines and local public utility regulations must be followed.
The units must not be used in environments with explosion hazards or in rooms with vapors
capable of damaging metal and plastics.
Table of contents
Page
1.
Application ................................................................................................................................11
2.
Reader models..........................................................................................................................11
3.
Functional description .............................................................................................................11
4.
Installation ................................................................................................................................12
5.
Connection diagram ................................................................................................................13
6.
Operational setup.....................................................................................................................14
7.
Operation ..................................................................................................................................15
8.
Cleaning and maintenance......................................................................................................15
9.
Technical specifications ..........................................................................................................16
4.1 Dimensions ........................................................................................................................12
4.2 Mounting instructions .........................................................................................................12
5.1 Interface .............................................................................................................................13
6.1 Introduction ........................................................................................................................14
6.2 Setting the address ............................................................................................................14
6.3 Parameters.........................................................................................................................14
6.4 LED display ........................................................................................................................14
7.1 Activating the keypad .........................................................................................................15
7.2 Switch/control process .......................................................................................................15
7.3 Triggering macros ..............................................................................................................15
