Honeywell Kromschroder TC 1 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 12

Honeywell Kromschroder TC 1 Скачать руководство пользователя страница 11

GB-11

D

GB

F

NL

I

E

Logistics

Transport

Protect the unit from external forces (blows, shocks,
vibration). On receipt of the product, check that the
delivery is complete, see page 2 (Part designa-
tions). Report any transport damage immediately.

Storage

Store the product in a dry and clean place.
Storage temperature: see page 10 (Technical data).
Storage time: 6 months in the original packaging
before using for the first time. If stored for longer
than this, the overall service life will be reduced by
the corresponding amount of extra storage time.

Packaging

The packaging material is to be disposed of in ac-

cordance with local regulations.

Disposal

Components are to be disposed of separately in
accordance with local regulations.

Certification

Declaration of conformity

We, the manufacturer, hereby declare that the prod-

uct TC 1 – 3 with product ID No. CE-0085CS0076
complies with the requirements of the listed Directives
and Standards.
Directives:

– 2014/35/EU – LVD
– 2014/30/EU – EMC

Regulation:

– (EU) 2016/426 – GAR

Standards:

–  EN 1643:2014
–  EN 60730-2-5:2015
–   EN 61000-6-2:2005
–  EN 61508:2010, Parts 1 – 7
–  SIL 3 according to EN 61508

The relevant product corresponds to the tested type

sample.

The production is subject to the surveillance proce-

dure pursuant to Regulation (EU) 2016/426 Annex III
paragraph 3.
Elster GmbH

Scan of the Declaration of conformity (D, GB) – see
www.docuthek.com

«
...
9
10
11
12
»

Содержание Kromschroder TC 1













Отзывы:

Нет отзывов