manualshive.com logo in svg

Honeywell Krom Schroder PFU 780, Техническая информация, Страница: 4 / 71

Поделиться
Скачать
Honeywell Krom Schroder PFU 780 Скачать руководство пользователя страница 4

PFU 780 · Edition 02.12l

4

Application

Module subrack 
BGT for instance 
serves to accom-
modate several 
function units. It 
is provided with 
a backplane with 
screw terminals 
for simple, reliable 

wiring.

1 Application

The burner control units PFU 780 control, ignite and 

monitor gas burners for intermittent or continuous op-
eration. As a result of their fully electronic design they 
react quickly to various process requirements and are 
therefore also suitable for frequent cycling operation.

The PFU 780 can be used for industrial burners of un-

limited capacity which are ignited by pilot burners. Pilot 
and main burners are controlled and monitored inde-
pendently. This reduces the main burner start-up time. 

The pilot burner can burn permanently or be switched 

off. The main burners may be modulating or stage-
controlled.

On industrial furnaces, the PFU 780 reduces the load 

on the central furnace control by taking over tasks that 
only relate to the burner, for example it ensures that 

the burner always ignites in a safe condition after it has 
been restarted.

The burner control unit is used for burners with me-

chanical combustion air supply where the fan is con-
trolled by a separate logic and for atmospheric burners.

The air valve control on the PFU 780L assists the fur-

nace control for cooling, purging and capacity control 
tasks.

The program status, the unit parameters and the level 

of the flame signal can be read directly from the unit. 

Pilot and main burners can be controlled manually for 

commissioning and diagnostic purposes.

▼

Содержание Krom Schroder PFU 780








































































Отзывы:

Нет отзывов