ICON 100 SERIES INSTALLATION GUIDE
The Icon 100 Series have the following features.
•
display the measured case temperature as well as the alarm
messages that refer to faulty cooling/refrigeration plant functions.
•
control the measured temperature through the thermostat probe in
order to maintain it under a set limit value (main set point +
differential), by activating the compressor to lower said temperature
every time it exceeds the main set point + differential value.
•
control the defrost cycles of the cooling/refrigeration plant manually or
through the programmed mode; in the latter mode it is possible to set
the times of up to four daily defrost cycles (112SR & 132SR models
only)
•
control the defrost cycle time as well as the successive startup of the
cooling/refrigeration plant fan through the defrost probe. (112SR &
132SR models only)
•
Honeywell Genus
®
Network compatible.
•
Optional Genus
®
comms. Module.
EN1B-0004UK07 R1003
7
