Honeywell HZC-363N Series, Руководство по эксплуатации

Страница: 20 / 26

- 20 -
5.12 MD MODE
:Supports Motion detection and 64 areas can be selectable.
①
Mode : User can decide whether you will use motion
detection function or not
MODE OFF
→
ON
②
Motion area
:
User can configure motion detection area. Area selection
method is same to BMB area selection
5.2 PIP MODE
: PIP (Picture-in-Picture) works when Digital zoom is
working. After you make CONTROL “ ON ” and exit OSD
menu, if you push LEFT, RIGHT buttons then digital
zoom will work and you can get PIP on the screen.
①
Control of PIP
:
This function makes PIP On/Off
.
CONTROL OFF
→
ON
②
Position of PIP
:
PIP display can have a position of Right-Top, Right-Bottom,
Left-Top, Left-Bottom.
.
POSITION R.BOTTOM
→
…
→
L.TOP
<< PIP MODE >>
CONTROL
POSITION
RETURN OFF
R.TOP
<Fig5-21. PIP MODE >
5.2 QUAD MODE
: QUAD Mode supports 4 split screen display. There are two
working mode of “ manual push ” or “ sequence switching ”
for split screen change.
①
Display mode
:
It makes QUAD mode ON/OFF. If it is selected as LIVE,
normal video will be displayed, and if it is selected as QUAD,
screen will be split.
DISPLAY LIVE
→
QUAD
②
Video Capture
:
When DISPLAY is set as QUAD, if you push MENU button
then still image will be displayed at each split screen with
clockwise direction.
CAPTURE PUSH
③
Sequence
:
If SEQUENCE is set as “ ON ” then each split screen will
display still image, and still image will be changed by time
interval decided at dwell time.
SEQUENCE OFF
→
ON
④
Switching time
:
When SEQUENCE is set as “ ON ” , still image ’ s refresh time
can be decided by this DWELL TIME value (sec)
DWELL TIME 10
→
11
→
… .
→
100
<< QUAD MODE >>
DISPLAY
CAPTURE
SEQUENCE
DWELL TIME
RETURN LIVE
PUSH
OFF
10
<Fig5-22. QUAD MODE >