-
-
Fig. 3
Fig. 4
Fig. 5
NEVER LEAVE AN OPERATINg UNIT UNATTENDED
1. Place heater on stable, level surface 3 ft. (0.9M) away from any combustible materials (furniture, drapes, etc) (
Fig. 3
).
2. With the knob in the OFF position, plug the heater into an electrical wall outlet (
Fig. 4
).
3. Turn the thermostat knob fully clockwise to the HIGH setting (
Fig. 5
).
Fig. 2
Fig. 6
Fig. 7
Fig. 8
4. To turn the heater on, turn the power knob clockwise to the ON position. Please note, this is a silent heater so you will not hear
a fan noise when it is on (
Fig. 6
).
5. When the room reaches a comfortable temperature, slowly turn the thermostat control counter-clockwise until the heater
goes off and you hear a click. This is the point which the thermostat setting equals the room temperature. At this setting, the
thermostat will automatically turn the heater on and off to maintain the desired temperature (
Fig. 7
).
6. This heater uses natural convection technology where heat is emitted out of the top of the grille, naturally rises and then
circulates throughout the room to create warm even heat (
Fig. 8
).
OPERATION
