background image

Configuration

Rev 3.03

33

Document 900.0315

02/07

System Log Screen

Highlight 

System Log

 in the Main Menu (

MENU

 

 

System

 

 

System Log

) and then 

press 

 . The System Log screen displays.

Figure 3-16

System Log Screen

The System Log screen displays a record of various events logged by the DVR. The list 
shows the dates and times the system was turned ON and OFF, the system was 
restarted, recording was started or stopped, playback was started or stopped, setup 
changes were made, and data banks were cleared.

The events are listed from the most recent to the oldest. To scroll through the list a page 
at a time, select the Up and Down Arrow buttons on the screen and then press 

 . To 

go directly to an event number, highlight the event number box (left of the UP Arrow), 
press 

 , use the Arrow buttons to change the number, and then press 

 .

System Shutdown

Highlight 

System Shutdown

 in the Main Menu (

MENU

 

 

System

 

 

System 

Shutdown

) and then press 

 . This shuts the DVR down. When shutting down the DVR, 

you need to confirm that you want to shut down the unit, and you will be asked for an 
administrator password.

Содержание HRHD 410

































































































































Отзывы: