Honeywell HRGX161, Руководство пользователя

Страница: 15 / 150

Introduction | 15
800-16694 - A - 04/2014
The following illustration shows the front panel of the 8/16-channel HRGX DVR.
Figure 1-2 HRGX8/HRGX16 Front Panel
No. Name Function
1 Alphanumeric Buttons SHIFT: Switches between number/letter input and function input.
MENU/1: Enters 1; MENU accesses the main menu interface.
2ABC/F1: Enters 2/A/B/C; F1 selects all items in a list. In live view or
playback mode, F1 switches between main and spot video output.
In PTZ mode, F1 zooms out PTZ camera.
3DEF/F2: Enters 3/D/E/F; F2 cycles through tabbed pages.
In PTZ mode, F2 zooms in PTZ camera.
4GHI/ESC: Enters 4/G/H/I; ESC returns to previous menu.
5JKL/EDIT: Enters 5/J/K/L; EDIT deletes characters before cursor,
selects check boxes and on/off switches. In playback mode, EDIT
starts/stops playback.
6MNO/PLAY: Enters 6/M/N/O. In playback mode, PLAY accesses the
playback interface.
7PQRS/REC: Enters 7/P/Q/R/S; REC accesses the manual recording
interface, manually starts/stops recording.
8TUV/PTZ: Enters 8/T/U/V; PTZ accesses the PTZ control interface.
9WXYZ/PREV: Enters 9/W/X/Y/Z. In live view mode, PREV enables
multi-camera display. In playback mode, PREV deletes selected tag.
0/A: Enters 0; A switches between uppercase and lowercase letters,
symbols, numeric input). In playback mode, A adds default tag.
2 Direction/Enter Buttons Direction buttons move the cursor up/down/left/right (
  
).
In live view mode, the direction buttons cycle through channels. In
playback mode, up/down buttons speed up/slow down playback. In
PTZ mode, the direction buttons control PTZ camera movement.
The Enter button (  ) selects a menu item or executes a selection.
3 LED Indicators POWER: Lights green when DVR is receiving power.
READY: Lights blue when DVR is operating properly.
STATUS: Lights blue when DVR is controlled by IR remote. Lights red
when DVR is controlled by keyboard. Lights orange when DVR is
being controlled by IR remote and keyboard at the same time.
ALARM: Lights red when a sensor alarm is detected.
HDD: Flashes red when DVR hard drive is reading/writing.
Tx/Rx: Flashes green when network connection is active.
4 USB Port Connects USB device (such as a flash drive for saving video clips).
1
4
3 2