Honeywell HP ProLiant DL360P Gen8, Руководство по обслуживанию

Страница: 4 / 67

3.1.1 Before you begin 26
3.2 Power and grounding requirements 26
3.3 Cabinet spacing requirements 27
3.4 Installing the server and connecting the cables 28
3.4.1 Honeywell server back panel connections 28
3.4.2 Installing the server 28
3.4.3 Connecting the cables 29
3.4.4 Install air duct baffles and blank panel front covers in cabinet 30
3.5 Starting the server 32
3.5.2 Configuring RAID in HP ProLiant DL360p Gen8 server 32
3.5.3 Starting the TDC emulator services 32
3.5.4 Checking the LCNP4e/LCNp4e2 status 33
Chapter 4 - Operation 34
4.1 Server overview 34
4.1.1 Front view 34
4.1.2 Rear view 35
4.2 Network connections 36
4.2.1 Ethernet network 36
4.2.2 LCN network 36
4.2.3 LCN cables 37
4.2.4 LCN connections 37
4.2.5 MAU connection 37
4.2.6 ControlNet Network 38
4.3 Configuring ControlNet interface card 39
Chapter 5 - Servicing 40
5.1 Remove the server from the rack 40
5.2 Removing the access panel 40
5.3 Servicing the LCNP4e/LCNp4e2 41
5.3.1 Replacing the LCNP4e/LCNp4e2 board 42
5.4 Servicing the hard disk drives and power supply 46
5.4.1 Installing hot spare hard drive 46
5.5 Servicing Honeywell options 47
5.5.1 LCN node setup board configuration 48
5.5.2 Slot requirements for general Ethernet and FTE node setup 48
5.5.3 Add additional memory 48
5.5.4 Verifying correct BIOS settings 50
- 4 -