Configuring Network Settings
37
Configuring SNMP Settings
You can configure Simple Network Management Protocol (SNMP) settings on the
Setup >
Network Setup > SNMP
page.
SNMP is a protocol for collecting, organizing, and exchanging management information
between managed devices on a network.
To enable SNMPv1 and/or SNMPv2:
1.
Next to
SNMP Version
, select the SNMP version(s) that you want to use. You can select
SNMPv1 only, SNMPv2 only, both SNMPv1 and SNMPv2, or SNMPv3 only.
2.
By default, the
SNMP Port
is
161
. To change the port, enter a number in the range
1–65535.
3.
In the
Trap Address
field, enter the IP address of the SNMP server where trap
notifications will be sent.
4.
By default, the
Trap Port
is
162
. To change the port, enter a number in the range
1–65535.
5.
Click
Save
to apply the settings.
Configuring Bonjour
You can configure Bonjour settings on the
Setup > Network Setup > Bonjour
page.
Bonjour is a zero configuration networking application that allows you to create a network in
which devices can discover each other without requiring any user configuration.
When this function is enabled, you can discover the camera on a Mac OS computer by
opening Safari and going to
Display All Bookmarks > Bonjour
.
Bonjour is enabled by default. To disable it, clear the
Enable
check box, and then click
Save
.
Содержание HMBL8GR1
Страница 1: ...equIP Series Cameras ULTRA HD IP CAMERA H4L6GR2 HBL6GR2 HM4L8GR1 HMBL8GR1 USER GUIDE ...
Страница 2: ......
Страница 3: ...i Revisions Issue Date Revisions A 07 2017 New document ...
Страница 10: ......