Honeywell HM 80, Инструкция по установке и эксплуатации, Страница: 22 / 60

Operation CM67RFMV
22
4.2. Setting the time
►
Move the slide switch to the position
DAY/
.
The time display and the day marking start to flash in
order to indicate the possible modification.
►
Press the + or - button until the correct time is
indicated.
Each pressing of a button adjusts the time by
one minute and ends the flashing of the display.
The time is adjusted faster if the button is kept
pressed.
►
Press the
DAY 1…7
button until the day marking is
positioned on the right day (day 1 is Monday). Each
pressing of a button moves the marking by one day.
4.3. Factory default heating program
The factory default program works with six room
temperature setpoints that are shown in the
display with the numbers 1, 2, 3, 4, 5 and 6.
The temperature switching points can be de-
activated (see chapter 4.5).
►
Move the slide switch to the position
AUTO
.
The CM67RFMV regulates the room temperature to the
factory default program.
Monday to Friday
Program 1 2 3 4 5 6
Time 06:30 08:00 12:00 14:00 18:00 22:30
Temperature 21 °C 18 °C 21 °C 18 °C 21 °C 16 °C
Saturday and Sunday
Program 1 2 3 4 5 6
Time 08:00 10:00 12:00 14:00 18:00 22:30
Temperature 21 °C 21 °C 21 °C 21 °C 21 °C 16 °C
4.4. Entering and modifying a personal
heating program
►
Move the slide switch to the position
PROG
.
The first room temperature setpoint and the temperature
values for the Monday program are displayed (the two
small arrows in the display are only displayed if the
programmed temperature value is displayed). The
flashing display indicates that modifications are possible.
►
Press the button + or - in order to set the first room
temperature setpoint.
The time is adjusted faster if the button is kept
pressed.
The room temperature setpoint can be set in 10-
minute steps starting from 03:00 in the morning.
The room temperature setpoint can be adjusted
until 02:50 in the following morning so that you
can set the night time until beyond midnight.
If you press the button + and the next room
temperature setpoint number 2 flashes in the
display, this means that the room temperature
setpoint 2 is set forward if you continue to press
the button +.
►
Press the button
TEMP
or
TEMP
in order to set the
first temperature value.
The value is adjusted faster if the button is kept
pressed. The temperature can be set in steps of
0.5 °C from 5 °C to 30 °C.
►
Press the button
PROG 2
in order to set the second room
temperature setpoint and temperature for Monday.
►
Set them using the buttons + or - and
TEMP
or
TEMP
.
The remaining temperature switching times for
Monday can be selected by pressing the buttons
PROG 3
,
4 , 5
and
6
and set using the buttons +
or - and
TEMP
or
TEMP
.
►
If you do not want to use all the temperature switching
times, please read the section “Deactivating room
temperature setpoints”.
►
Press the button
COPY DAY
, in order to copy the Monday
program to Tuesday. In order to set several days of the
week to the same program, press the button
COPY DAY
several times.
►
Press the button
DAY 1…7
in order to move the day
marking to Tuesday (day 2).
The program for Tuesday can now be set. The programs
for Wednesday (day 3) to Sunday (day 7) can be set by
the same method by using the button
DAY 1…7
.
►
When you have set the heating program for all the week-
days, move the slide switch to
AUTO
position.
The CM67RFMV regulates the room temperature to the
set program.
4.5. Deactivating room temperature
setpoints
The factory default program works with six temperature
switching times which are shown in the display with the
PROG 1, 2, 3, 4, 5
and
6
.
►
In order to deactivate switching times that are not required,
press the corresponding button (
PROG 1, 2, 3, 4, 5
or
6
) for
a few seconds.
The switching time is deleted and dashes are displayed
instead of time and temperature.
►
In order to reactivate the deleted room temperature
setpoints, press the corresponding buttons (
PROG 1, 2, 3, 4,
5
or
6
) for a few seconds.