Honeywell HDZ30A, Руководство пользователя

Страница: 85 / 114

Operation and Configuration | 85
800-16526 - A - 07/2014
AUTOPAN
Users can select AUTOPAN mode to assign an autopan path to the schedule point. A autopan
number must also be selected when this mode is selected. The autopan path must be
previously configured to be available to select (see
Setting Up an Autopan Path on page 69 ).
MIMIC TOUR
Users can select MIMIC TOUR mode to assign a mimic tour to the schedule point. A mimic tour
number must also be selected when this mode is selected. The mimic tour must be previously
configured to be available to select (see
Setting Up a Mimic Tour on page 71 ).
IR FUNC. (IR Function)
If a user selects the IR function mode, the AUTO IR FUNCTION will be activated for the selected
schedule point.
Reseting a Schedule
Users can reset the whole schedule by selecting this field.
Exiting the Schedule Menu
Exit the SCHEDULE menu and go back to the MAIN PAGE 3 to continue configuring camera
settings.
Exiting the On-Screen Display
To exit the OSD setup menu, users can either select the EXIT OSD item on the bottom of MAIN
PAGE 3 and press IRIS+. Alternatively, you can press the IRIS- key on the control keyboard
from any position on MAIN PAGE 1, 2 or 3 to exit the OSD setup menu.