Honeywell HDZ20HD, Руководство пользователя

Страница: 118 / 164

www.honeywell.com/security
118 | HDZ Series IP PTZ User Manual
Network Settings
This section contains instructions for assigning the camera a fixed IP address, setting the
camera to automatically obtain a DHCP assigned IP address, enabling PPPoE, configuring
ports, enabling IPv6 address configuration, prioritizing services, and enabling SNMP, UPnP,
and DDNS.
Basic Network Settings
The camera is assigned a dynamic (DHCP) IP address by default. Use the Honeywell Device
Search tool to find the automatically assigned dynamic IP address (refer to
Finding the Camera
on a Network on page 35 for more information).
If required, you can assign the camera a fixed (static) IP address. You can also assign a fixed IP
address in the Honeywell Device Search application (see
Assigning a Static IP Address to the
Camera on page 36 for more information).
Assigning a Fixed IP Address
If required, you can assign the camera a static (fixed) IP address (or a different fixed IP address).
You can also assign a fixed IP address in the Honeywell Device Search application (see
Assigning a Static IP Address to the Camera on page 36 for more information).
1. Navigate to System

Network

Basic (see Figure 7-8 ).
2. Select the Use fixed IP address option in the General section of the screen.
3. Fill in the IP address , Subnet mask , Default gateway , Primary DNS , and Secondary
DNS fields.
4. Click Save under the PPPoE Password field.