manualshive.com logo in svg

Honeywell HCM-631N - Quietcare 3 Gallon, Руководство пользователя

Поделиться
Скачать
Honeywell HCM-631N - Quietcare 3 Gallon Скачать руководство пользователя страница 4

GETTING 

ST

AR

TED

Water Quality and Hardness 

Proper filtration is critical for the operation of the TrueSTEAM humidifier. Failure to address water quality can 
potentially lead to drastically increased maintenance requirements and premature failure of the TrueSTEAM 
humidifier and its components. Be sure to complete the following procedure well in advance of installation to 
ensure any additional costs are documented and understood.

It is imperative to fully understand the quality and hardness of the water that will be used on each individual 
TrueSTEAM humidifier. Water quality and water hardness can vary greatly from home to home, and even between 
two homes on the same street. Water test kits are included with every TrueSTEAM model and are also available 
for purchase separately (50044721-001). Proper use of these kits will help determine which filtration option is right 
for each particular installation.

Testing Water Quality and Interperting Results

The color block will recommend the best water filtration method for the home.

Fill the plastic tube with water directly from the
TrueSTEAM input water source.

Note: It is important to test the specific input to TrueSTEAM,

as it may differ from the faucet taps in the home. 

Dip the colored end of one of the test strips into
the tube’s water for 3 seconds. 

Remove the test strip. Do not shake the strip.

Wait 20 seconds and then match the test strip’s
color to the closest color block on the water
hardness scale.

Note: Strip color results are no longer valid after one minute.

MCR32902

1

2

4

3

RANGE 1

RANGE 2

RANGE 3

Water

Softener

RO Filter Part No.

50045947

Honeywel

l

Recommends

Polyphosphate

Filter Part No.

50028044

Choosing the Filter

If the water tests in range 3 then the TrueSTEAM humidifier will require the use of a while house water softener 
for optimal performance. Failure to use softened water in this situation can potentially lead to drastically increased 
maintenance requirements and premature failure of the TrueSTEAM and its components. Water hardness in 
this range negatively affects all facets of a home including shower heads, faucets, laundry machines (as well as 
TrueSTEAM).

In applications with softened water, use of the in-line polyphosphate filter is recommended.

Critical Installation Information

TrueSTEAM Humidification System   69-2285—01

2

Содержание HCM-631N - Quietcare 3 Gallon

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды