Honeywell HCD5HIH, Справочное руководство

Страница: 20 / 104

20
Installation and Setup
Figure 2-2 Camera Mount
Wiring
Figure 2-3 Camera Connections
Caution Installation must be performed by a qualified service technician and
must be in accordance with all national and local mechanical and
electrical codes.
Connecting Video
Spot Monitor
The analog video connection is available as a test output and should be used during
installation to aim and focus the camera as needed.
Connect the VIDEO connector on the rear of the camera to the video input connector on
your spot monitor.
Use standard size
mounting bolts (1/4 x 20)
to mount the camera on
a bracket or tripod.
Analog video connection
for a spot monitor
24 V AC power
Audio line level input and
output connections (600
Ohm impedance).
RJ45 Ethernet network
connection (using
10Base T or 100Base
TX cable). Also for
Power over Ethernet
(PoE 802.3 af).
Alarm input (maximum rated
voltage level 24 V DC) and output.
Contacts rated 12 V DC @ 0.5 A.