Pairing
Method
Information About this Pairing Method
pairing, as the user is performing the pairing procedure away from other users. Also,
once a manual pairing is made (assuming no other configuration parameters have
been changed), the pairing will persist and that device and headset will stay paired
until the pairing is explicitly cleared.
VoiceConsole
pairing:
The user pairs a specific device to a headset via the VoiceConsole interface.
Screen-Based
pairing:
See Screen-Based Pairing information in this chapter for details on pairing handheld
devices to a headset.
Pairing an SRX3 Headset
The
SRX3 Wireless Headset makes pairing and connecting even easier:
l
It automatically enters low power pairing mode when it is
turned on.
l
It can break and re-enter pairing modes from a powered-
on state.
l
No headset reboot is necessary.
l
It accepts connections from any device that was previously
paired to it.
Pairing an SRX3 Headset with an A700
Device Using TouchConnect™
The A700 device can use TouchConnect to connect to an SRX3 Wireless
Headset when:
l
the A700 device is running VoiceCatalyst
l
Bluetooth is enabled
l
the device is sleeping (not running a task)
l
a wired headset is not attached or a wireless headset is not actively
connected to the device
l
the parameter SRXHeadsetEnable is set to 1 (Enabled), the default
l
the parameter SrxAutoPairEnable is set to 0 (Disabled), the default
For best performance when using an SRX3 headset with a Talkman A700
device, use the latest SRX3 software version. Obtain the latest headset software
from your Honeywell portal or reseller and use the Honeywell Accessory Update
Utility to upgrade your SRX3 headset.
SRX3 User Guide - Preliminary
34
Содержание HBT1500-01
Страница 1: ...SRX3 Headset User Guide ...
Страница 56: ...SRX3 User Guide Preliminary 50 ...