Honeywell HBT1500-01 страница 19 Скачать руководство пользователя | Manualshive

Страница: 19 / 70

background image

Attaching the SRX3Electronics Module to a
Headband

1. Position the electronics module with the button controls facing away from

the headband.

2. Insert the speaker on the back of the electronics module into the pocket on

the earpiece hub by aligning the notches on the speaker and hub pocket.

3. Push the electronics module into the hub pocket until it is firmly seated.

Removing the SRX3 Electronics Module from
a Headband

IMPORTANT
Do not squeeze the battery latches on the sides of the electronics module
while removing it from the headband. The battery may be inadvertently
released from the electronics module.

1. Grasp the electronics module with one hand, pressing your thumb and

fingertips into the gap between the electronics module and earpiece hub.

2. With the other hand, hold the headband by the earpiece hub.
3. Pull the electronics module away from the earpiece hub.

SRX3 Compatibility

Honeywell has tested the SRX3 Wireless Headset with the following devices and Vocol-
lect Voice Software versions. Support and compatibility of the SRX3 headset is not lim-
ited to these products, but the customer assumes risks related to untested
configurations.

Device

Vocollect Voice Software

Vocollect Talkman A700/A700x

VoiceClient® 3.9 and newer
VoiceCatalyst® 2.0 and newer

Vocollect Talkman A500 and Talkman A500 VMT

VoiceClient® 3.8 and newer
VoiceCatalyst® 1.1 and newer

13

SRX3 User Guide - Preliminary

«
...
17
18
19
20
21
...
»

Содержание HBT1500-01







































































Отзывы:

Нет отзывов

Похожие инструкции для HBT1500-01

Бренд: Cardo Systems Страницы: 12

Бренд: alphatronics Страницы: 40

Бренд: Porta Phone Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 10

Бренд: Sony Страницы: 9

Бренд: Sony Страницы: 96

Бренд: Sony Страницы: 104

Бренд: Sony Страницы: 106

Бренд: Sony Страницы: 108

Бренд: Sony Страницы: 109

Бренд: Sony Страницы: 102

Бренд: Sony Страницы: 114

Бренд: Sony Страницы: 124

Бренд: Sony Страницы: 109

Бренд: Sony Страницы: 114

Бренд: Sony Страницы: 111

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды