– 10 –
Connection Diagram of Lighting Modules
Connection Diagram of Lighting Modules is shown below
HAS-002-V0
AC OUTLETS
AC OUTLETS
AC OUTLETS
AC OUTLETS
AC OUTLETS
LAMP / APPLIANCE
MODULE
LAMP / APPLIANCE
MODULE
LAMP / APPLIANCE
MODULE
LAMP / APPLIANCE
MODULE
LAMP / APPLIANCE
MODULE
HONEYWELL HOME AUTOMATION SERVER
CONTROL INTERFACE
(WIRED / WIRELESS)
USER INTERFACE
OPTIONS
COMPUTER
MIC
PHONE
•
Lamp/Appliance Modules for the different areas in the residence can be directly
connected to AC Power with the Normal Wiring. Wireless lighting solutions are
also available. Refer to your Automation O/S software documentation for
additional information. Set the device address and code as per the technology
used.
•
Connect the control interface to the server using the appropriate cables and to
right ports (RS-232, USB, and Ethernet). Refer to the installation/user manuals
supplied with the control interface for details
•
Configure the Software Settings with the Device Name or Unit Code and House
Code Details. Refer to the manual supplied with the Automation O/S software
that you purchased for details.
•
User can set the lighting scene, grouping and modes in the software.
•
User interface with the Honeywell Home Automation server may be achieved by
computer, home telephone or microphone.
For detailed instructions on how to configure Schedules, Modes and Tasks please
refer to the manual supplied with the Automation O/S software that you purchased.