Honeywell GSMVLP5-4G Скачать руководство пользователя страница 4

 

 

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS 

The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or 
User's Manual. Unauthorized changes or modifications could void the user's authority to operate the equipment. 

 

FCC CLASS B STATEMENT 

This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the 
following statement for your information: 
 
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict 
accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type 
tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of 
FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 
•  If using an indoor antenna, have a quality outdoor antenna installed. 
•  Reorient the receiving antenna until interference is reduced or eliminated. 
•  Move the radio or television receiver away from the receiver/control. 
•  Move the antenna leads away from any wire runs to the receiver/control. 
•  Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits. 
•  Consult the dealer or an experienced radio/TV technician for help. 

 

INDUSTRY CANADA CLASS B STATEMENT 

ICES-003 Class B Notice - Avis NMB-003, Classe B 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 

 

FCC / IC STATEMENT 

This device complies with Part 15 of the FCC Rules, and RSS 210 of IC. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference (2) This device must accept any interference received, including 
interference that may cause undesired operation. 
 
Cet appareil est conforme à la partie 15 des règles de la FCC & de RSS 210 des Industries Canada. Son fonctionnement est 
soumis aux conditions suivantes: (1) Cet appareil ne doit pas causer d' interferences nuisibles. (2) Cet appareil doit accepter 
toute interference reçue y compris les interferences causant une reception indésirable.

 

 

 

RF Exposure 

WARNING:   The communications module

 

must be installed to provide a separation distance of at least 20 cm 

from all persons.

 

 

WARRANTY INFORMATION 

 

For the latest warranty information, please visit: 

www.honeywell.com/security/hsc/resources/wa 

 

 
 
 

2 Corporate Center Drive, Suite 100

P.O. Box 9040, Melville, NY 11747

Copyright © 2011 Honeywell International Inc.

www.honeywell.com/security

 

 

Ê800-10344zŠ 

800-10344  12/11  Rev. A

 

 

Содержание GSMVLP5-4G

Страница 1: ...d including interference that may cause undesired operation IC MODEL LYNXTOUCH2 FCC ID CFS8DLLYNXTOUCH2 CONTAINS MODULE FCC ID QIPPH8 IC 7830A PH8 IC MODEL PH8 Figure 1 FCC IC Label Location 2 Release the LYNX Touch front case from the back case by depressing the two locking tabs at the top of the unit with the blade of a medium size screwdriver Refer to Figure 2 3 Install the GSMVLP5 4G GSMVLP5CN...

Страница 2: ...fer to Figure 3 3 Remove the ILP5 receptacle knockout from the left side of the LYNX Touch back case Refer to Figure 3 4 Install the ILP5 into the LYNX Touch control front case Ensure that the connector board is properly seated into the receptacle on the control Refer to Figure 3 5 Secure the ILP5 with the three provided screws Refer to Figure 3 6 Insert the ILP5 receptacle and spacer into the slo...

Страница 3: ...ALTERNATE INSTALLATION LOCKING TABS ETHERNET CABLE TO ILP5 Figure 3 Installing the ILP5 in the LYNX Touch Electrical Specifications GSMVLP5 4G GSMVLP5CN 4G Voltage Input 5V provided by the control panel Current Idle 15 mA standby Average 300mA average transmit Peak 1 6A peak transmit 25 duty cycle ILP5 Voltage Input 5V provided by the control panel Current 83 mA 100 Base T with traffic 41 mA 10 Ba...

Страница 4: ...ed Move the radio or television receiver away from the receiver control Move the antenna leads away from any wire runs to the receiver control Plug the receiver control into a different outlet so that it and the radio or television receiver are on different branch circuits Consult the dealer or an experienced radio TV technician for help INDUSTRY CANADA CLASS B STATEMENT ICES 003 Class B Notice Av...

Отзывы: