Honeywell Granit XP 199 i Series, Руководство пользователя

Страница: 60 / 312

42 Granit XP User Guide
noisy RF environments. The bases (Bluetooth Class 1 or Class 2) provide a commu-
nication range of 328 feet (100m) or 33 feet (10m) between the scanner and base
or Access Point, depending on the environment. See
Flexible Power
Management , page 58, for information about controlling this range.
System Conditions
The components of the cordless system interact in specific ways as you associate a
scanner to a base or Access Point, as you move a scanner out of range, bring a
scanner back in range, or swap scanners between two cordless systems. The
following information explains the cordless system operating conditions.
Link Process
Once a scanner is placed into a cordless charge base, the scanner’s charge status
is checked, and software automatically detects the scanner and links it to the base
depending on the selected link mode.
Scanner Is Out of Range
The cordless scanner is in communication with its base or Access Point, even when
it is not transmitting barcode data. Whenever the scanner can’t communicate with
the base or Access Point for a few seconds, it is out of range. If the scanner is out of
range and you scan a barcode, the scanner issues an error tone indicating no com-
munication with the base or Access Point. A cordless charge base can also sound
an alarm. Refer to
Out-of-Range Alarm , page 55.
Scanner Is Moved Back Into Range
The scanner relinks if the scanner or the base or Access Point have been reset, or
the scanner comes back into range. If the scanner relinks, you will hear a single
chirp when the relinking process (uploading of the parameter table) is complete.
Refer to
Out-of-Range Alarm on page 55 for further information.
Out of Range and Back into Range with Batch Mode On
The scanner may store a number of symbols (approximately 500 U.P.C. symbols;
others may vary) when it is out of range and then send them to the base or Access
Point when back in range (see
Batch Mode on page 59).
You will not hear a communication error tone in this mode, but you will hear a short
buzz when you press the trigger if the radio communication is not working. Once
the radio connection is made, the scanner produces a series of beeps while the
data is being transferred to the base or Access Point.