Honeywell GA-SP01, Руководство пользователя

Страница: 23 / 31

The Sampler
Maintenance
Maintenance
To keep the sampler in good operating condition, perform the
following basic maintenance as required:
• Keep an operations log of all maintenance and fault
events.
• Clean the exterior with a soft damp cloth. Do not use
solvents, soaps or polishes.
• Do not immerse the sampler in liquids.
•
Confirm that the filter is free of dirt and replace it if
necessary.
•
Confirm that the water trap is empty.
Replacing the Batteries
a
Warning
To avoid personal injury:
⇒
Replace the batteries as soon as the sampler
indicates a Low Battery Alarm.
⇒
Use only batteries recommended by
BW Technologies to prevent damage or personal
injury and maintain intrinsic safety.
⇒
Use only approved AA alkaline or charged AA NiMH
batteries, properly installed in the sampler. See the
Specifications section for approved batteries.
⇒
Charge batteries using only a recommended
charger. Do not use any other charger. Failure to
observe this precaution could lead to fire or
explosion.
⇒
Do not change or charge batteries in a hazardous
location. Doing so will impair the intrinsic safety of
the unit, and may lead to fire or explosion.
15
www.
optimum
stores
.com/bw
Shop for BW products online at: