Honeywell FBII OMNI 400 Скачать руководство пользователя страница 32

ONE YEAR LIMITED WARRANTY 

 

Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 165 Eileen 
Way, Syosset, New York 11791, warrants its security equipment (the "product") to be free from defects in 
materials and workmanship for one year from date of original purchase, under normal use and service. Seller's 
obligation is limited to repairing or replacing, at its option, free of charge for parts, labor, or transportation, any 
product proven to be defective in materials or workmanship under normal use and service. Seller shall have no 
obligation under this warranty or otherwise if the product is altered or improperly repaired or serviced by 
anyone other than the Seller. In case of defect, contact the security professional who installed and maintains 
your security equipment or the Seller for product repair. 
This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. THERE ARE 
NO EXPRESS WARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED 
WARRANTIES, OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION WITH THIS 
PRODUCT, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A 
PARTICULAR PURPOSE OR OTHERWISE, ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR 
FROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR BREACH OF ANY WARRANTY, IN-
CLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, MUST BE 
BROUGHT WITHIN 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL SELLER 
BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF 
THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY 
WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE 
OR FAULT. Some states do not allow limitation on how long an implied warranty lasts or the exclusion or 
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 
Seller does not represent that the product may not be compromised or circumvented; that the product will 
prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will in all 
cases provide adequate warning or protection. Buyer understands that a properly installed and maintained 
alarm may only reduce the risk of a burglary, robbery, fire or other events occurring without providing an alarm, 
but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or property 
loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, 
PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARN-
ING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS 
OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE 
OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE 
OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 
No increase or alteration, written or verbal, to this warranty is authorized. 

 

165 Eileen Way, Syosset, New York 11791

Copyright © 2004 Honeywell International Inc.

www.honeywell.com/security

 

ÊN9939V54Š 

N9939V5  4/04  Rev. A 

Содержание FBII OMNI 400

































Отзывы: