- 12 -
Arming the System (cont)
TO ARM THE SYSTEM IN INSTANT MODE
In
INSTANT
mode, all alarm sensors, including doors that normally have a delay
to allow you to disarm the system, will report an alarm immediately if activated.
Check to make sure the system is READY/
✔
. When it is ready, press:
INSTANT
/
followed by your user code.
When the system has been armed successfully, the ARM/
light and the
INSTANT/
light are lit, and the following is displayed:
LCD Keypad:
ON: INSTANT
Fixed-Word Keypad:
INSTANT/
LED Keypad:
ARM/
and INSTANT/
LED lit
TO ARM THE SYSTEM IN INSTANT MODE AND STAY INSIDE
In
INSTANT STAY
mode, the perimeter portion of your burglar alarm system is
armed, but the time delays are eliminated from your normal entry/exit door(s). All
interior protection is disarmed, so you are free to move around inside.
Check to make sure the system is READY/
✔
. When it is ready, press:
INSTANT
/
STAY
/
followed by your user code.
When the system has been armed successfully, the ARM/
light, the INSTANT /
light, and the STAY/
light are all lit, and the following is displayed:
LCD Keypad:
ON: STAY / INS
Fixed-Word Keypad:
STAY/
INSTANT/
LED Keypad:
ARM/
, STAY/
, and
INSTANT/
LEDs lit
