Honeywell EXPTZ-252A, Руководство по установке и эксплуатации

Страница: 19 / 46

HWLKS-C-M-1918
Honeywell
- 19 -
Follow the steps below to program the Tours:
1. Press
MENU
=> FUNCTION => TOUR, Short Cut : TOUR MENU to display the main menu on
the monitor.
No.
+
SHFT
+
TOUR
will open directly Tour
No.
2. Choose an empty location of function by pushing the
Joystick
up or down.
3. Stored Preset view can be recalled by pressing
Prst
button, the camera will move to the stored
Preset view.
4. To place predefined functions as a Tour, press the function buttons (such as Tour or Scan , Prst
). Then select function No. by twisting the Zoom handle. (Programmed function No. will be
scrolled). To remove functions from the Tour, press the
HOME or Off button, blank position mark
(- - -) will be displayed. You can overwrite the programmed position.
5. Repeat Step 2 through 4 for each desired position. Each title will be displayed on top of the line.
6. Up to 8 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand the Tour
sequence by calling other programmed tours. Push the
Joystick
handle to right or left while
the cursor is on the top of the line (TOUR 01) to select another page of the Tour menu. (TOUR
01)
7. You can enter a title for the selected Tour by twisting the
Joystick
while the cursor is on the top
of the line (TOUR 01). Rotate the handle clockwise or counterclockwise to scroll through the
alphanumeric characters. Push the handle to the right or left to select the next or previous digit.
8. Select Save and Exit by pushing the
Joystick
to the right. Press
ESC
to exit the program
without saving.
9. Press the HOME or OFF button to delete programmed data.
NOTE: All functions should be programmed before being referred to in the tour menu. Otherwise
functions won’t be selectable by item 4 in the procedure.
Program and Operation