4
MLSUC500 / 1250 Installation Guide 32340084-001 Rev A, 24-Aug-2018. MU1B-0638GE51 R0718A
MLSUC500 / 1250
Installation Guide
© 2018 Novar ED&S Limited.
Honeywell Ex-Or reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any
person of such revisions or changes.
Honeywell Ex-Or
St. Mark’s Court, North Street, Horsham, West Sussex, RH12 1BW, UK. Tel:+44 (0)1403 211888 Fax:+44 (0)1403 241608 www.ex-or.com
8
Check STAT & BEAT Indicators
9
Configure MLSUC500 / 1250
7
Switch On Power to MLSUC500 / 1250
6 DISPOSAL
WEEE Directive:
At the end of their useful life the packaging and
product should be disposed of by a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.
5
FIELD MAINTENANCE
MLSUC500 / 1250 requires no routine maintenance.
!
WARNING:
Contains no serviceable parts. Do not
attempt to open the unit. Failure to comply may
cause damage to the unit.
3 INSTALLATION
(continued)
MLSUC500 / 1250 Configuration Manual (W6003)
The following information will be useful;
•
RB2000 locations.
•
Zones and their respective RB2000 address must be clearly marked.
•
The Ballast type and timeout period should also be listed.
•
Zone identities. Such as room names or numbers.
•
LCM locations.
•
Emergency Ballasts.
Some of this information may only be available from those who commission the MLS
lighting control system which may or may not be an Ex-Or commissioning Engineer.
Normal operation indication
STAT
BEAT
Fault indications
STAT
Contact technical support.
BEAT
or
Contact technical support.
STAT BEAT
30s
O
I