3
USE & OPERATION (CONTINUED)
EN
POWER
Connect the power adapter to the cooler and to the electrical outlet. Press the button to turn the
unit on. The cooler will start automatically at low speed. To turn the unit off, press the button again.
COOL
Press the button to select Cool mode.
Please make sure the water tank is filled with water above the minimum level mark. Pressing the
COOL indicator light on the display screen activates evaporative cooling. The water pump will
operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
Note:
When the cooling function is switched OFF, the unit can still function in a fan only mode
(without evaporative cooling).
FUNCTION BUTTONS
SPEED
Press the button repeatedly to change the fan speed between - - - .
When AUTO is selected, the wind speed will gradually decrease and increase between the TurboBlast
and QuietSleep fan speeds.
QUIETSLEEP/ TURBOBLAST
Press the button to select either QuietSleep or TurboBlast modes. QuietSleep mode minimizes wind
speed for lower airflow. TurboBlast mode blasts wind at high speed for stronger airflow.
SWING
Press the button until the SWING indicator light is illuminated on
the display screen. The louvers will begin to move left to right automatically.
TIMER
Press the button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
/
LOUVER
MOVEMENT