10 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide
www.honeywell.com/security
Preparing the Wall for the Pendant Arm
1.
Use the pendant arm to mark holes on the mounting surface for the mounting screws.
2.
Use an appropriate drill bit to drill holes for the pendant arm mounting screws. Also drill an
appropriately sized hole in the mounting surface for the RJ45 cable.
Preparing the Pole for the Pendant Arm
To mount your 4-inch minidome camera to a pole. you will have to buy the optional pole
mounting kit, Honeywell part
HSWK-PM
.
Figure 17
HSWK-PM: 4-inch Minidome Wall Mount Kit
1.
Decide where to place the pole mount on the pole. Consider the height of the equipment
that you are installing.
2.
Pull the RJ45 cable through the opening on the HSWK-PM pole mount.
3.
Place the HSWK-PM pole mount on the pole, and secure in place with the stainless steel
straps (provided).
Mounting the Pendant Arm
1.
Remove the pendant arm cover plate from the pendant arm by loosening the M3x9.5 P
Head Mechanical Screw that keeps it securely in place.
2.
Thread the ethernet cable through the pendant arm.
Figure 18
Threading the Ethernet Cable Through the Pendant Arm
Pole Mount
Stainless Steel Straps
x2
