Honeywell Eclipse Скачать руководство пользователя страница 1

Contents

sAFetY

Please read and keep in a safe place

 Please read through these instructions carefully before 

installing or operating. Following the installation, pass the instructions 
on to the operator. This unit must be installed and commissioned 
in accordance with the regulations and standards in force. These 
instructions can also be found at www.docuthek.com. 

explanation of symbols

,

 = Action

= Instruction

Liability

We will not be held liable for damage resulting from non-observance 
of the instructions and non-compliant use.

safety instructions

Information that is relevant for safety is indicated in the instructions
as follows:

 DAnGeR

Indicates potentially fatal situations.

 WARnInG

Indicates possible danger to life and limb.

 CAUtIon

Indicates possible material damage.

All interventions may only be carried out by qualified gas techni-
cians. Electrical interventions may only be carried out by qualified 
electricians.

Conversion, spare parts

All technical changes are prohibited. Only use OEM spare parts.

Disclaimer notice

In accordance with the manufacture’s policy of continual product 
improvement, the product presented in this brochure is subject to 
change without notice or obligation.
The material in this manual is believed adequate for the intended 
use of the product. If the product is used for purposes other than 
those specified herein, confirmation of validity and suitability must 
be obtained. Honeywell-Eclipse warrants that the product itself does 
not infringe upon any United States patents. No further warranty is 
expressed or implied.

EN

 

– www.docuthek.com

Installing flame monitoring equipment on 

eclipse burners

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Troublelshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

oPeRAtInG InstRUCtIons

Version  · Edition 12.20 · 32-00267-01 · EN

Содержание Eclipse

Страница 1: ...ll interventions may only be carried out by qualified gas techni cians Electrical interventions may only be carried out by qualified electricians Conversion spare parts All technical changes are prohibited Only use OEM spare parts Disclaimer Notice In accordance with the manufacture s policy of continual product improvement the product presented in this brochure is subject to change without notice...

Страница 2: ... contain ions capable of conducting electrical current An AC voltage on the flame rod will conduct current through the flame to a grounding surface usually the metal parts of the burner The signal will be rectified to DC with a 4 to 1 ratio of surface areas of the burner ground and flame rod that are in contact with the flame On receipt of the DC signal the controller will send power to keep the a...

Страница 3: ...detector and its relay as each splice is a potential source of current leakage or grounding 2 Make sure the bare wire ends at each splice are clean and not oxidized Secure splices with twist or crimp connectors and tape if necessary to ensure that no bare metal is exposed 3 Make sure the connectors and tape are rated for the temperature at the splice location CAUTION Use Caution regarding wires th...

Страница 4: ... Thermal Solutions family of products includes Honeywell Combustion Safety Eclipse Exothermics Hauck Kromschröder and Maxon To learn more about our products visit ThermalSolutions honeywell com or contact your Honeywell Sales Engineer Eclipse Inc 1665 Elmwood Rd Rockford IL 61103 United States www eclipsenet com ThermalSolutions honeywell com FOR MORE INFORMATION ...

Отзывы: